Gezocht naar "I903d". Resultaat 131 tot 140 van 173.

The APF-X320MIB is the latest generation of Alpine interfaces for Volkswagen platform vehicles (including Skoda and Seat) to connect an Alpine navigation or Digital Media Station seamlessly to your vehicle’s electronics / CAN-bus and retain all vehicle setup functions and other important features such as the parking sensors display. It includes a complete plug-and-play wiring harness for adaptation to the original VW connectors. There is also an adapter cable for the original USB port and a hands-free microphone connection cable included.

• Plug-and-play wiring harness for VW platform vehicles
• CAN-bus interface for latest generation of vehicles
• Display of air condition / heater settings on Alpine screen
• Steering wheel remote control retention
• Car setup menu display and control on Alpine screen
• Support of Multi-Function Display (MFD) in instrument cluster
• Parking sensor display and rear camera connectivity
• Pre-flight Check for Camper Vans
• Original hands-free microphone adaptation
• Compatible with all Alpine Head Units featuring “Vehicle Data-Bus Interface Ready” functionality

This kit comes with all required installation parts such as CAN bus interface, installation brackets, antenna adapter with phantom feed, power quadlock adapter and trim panel.

This makes installation much easier and allows usage of the steering wheel control buttons and vehicle information display with your Alpine product.

The KIT-702MB, combined with the new INE-W720D / INE-W720DC / INE-W710D / INE-W710DC / iLX-702D, offers cutting edge navigation, paired with DAB+, Android Auto and Apple CarPlay compatibility. INE-W720D / INE-W720DC / INE-W710D / INE-W710DC also support turn-by-turn arrow guidance in the multi-function display.

Upgrade your Alpine Infotainment system with DVD and CD playback capability. The DVE-5300G fits perfectly in the Golf 7’s original VW CD drive compartment in the glove box. It uses HDMI technology for stunning image quality and can be fully controlled from the touch screen. All installation parts are included.

If your Golf is not equipped with a disk drive in the glove box, the installation of the DVE-5300G requires the VW glove box insert with disc drive mount.
Please contact your local VW service centre for details.

Voertuigspecifieke inbouwset voor de volgende Alpine achteruitrijcamera's:

HCE-C2100RD - Multi-View Achteruitrijcamera
HCE-C1100D - Achteruitrijcamera
HCE-C157D - Breedhoek Achteruitrijcamera

De inbouwset vervangt de originele handgreep. 

Thanks to HDR technology, the picture quality is much better compared to regular camera systems - for easier maneuvering and greater safety.

A rear view camera is a great way to improve your parking skills and make reversing safer. The camera image automatically comes on when you shift into reverse.

The cameras are very small, so they’re easy to install and don’t change the appearance of the car.

Works with Alpine products featuring Direct Camera Input.

The installation kit KIT-HALO-TRA7S lets you perfectly integrate a 1DIN Alpine Halo system with 9-inch or 11-inch screen (INE-F904D, INE-F904DC, iLX-F115D, iLX-F905D) into a Ford Transit Custom (model year 2018 ->). The kit also enables ±10° horizontal monitor swivel of your Alpine unit.
The KIT-HALO-TRA7S includes a CAN to UART interface featuring support of the steering wheel remote control buttons (latest data protocol including SIRI and OK Google support). It also includes a plug-and-play wiring harness to easily connect your Alpine unit to the Ford vehicle, a camera cable adapter (Alpine direct – RCA), an antenna adapter and a USB adapter. The wiring harness allows for easy access to ignition, speed signal and reversing signal from the CAN bus.
You can even retain the vehicle settings function in the Alpine head unit and includes the convenient “Preflight-Check” function for motorhome drivers.

Note:

• The KIT-HALO-TRA7S is only compatible with vehicles featuring original Ford 1DIN radio (model T15114A) or radio preparation. For Vehicle featuring the original Ford navigation system the original Ford 1-DIN Trim Panel is needed. Please ask your dealer.
• Vehicles with original radio and e-call system: the e-call system remains functional, but in some cases an error message may be displayed (vehicles with radio preparation will not encounter this problem).

Retain Steering Wheel and Vehicle Display Functions and Parking/Heating Visualisation

While replacing the original equipment will not limit the functions, drivers will appreciate the ability to retain such visualisations and controls. The APF-X300VW is our solution that allows the customer to receive the same kind of images while operating the heater or air condition controls and also during parking. The interface will also support the VW radio display in the instrument cluster (MFD) and VW Steering Wheel Remote Control.

Upgrade your Alpine infotainment system with DVD playback capability. The DVE-5300X is designed to fit exactly behind the audio control panel to be easily reached from the driver’s seat. It uses HDMI technology for stunning image quality and can be fully controlled from the touch screen or the Alpine control panel.

The DVE-5300 is the perfect choice for adding DVD capability to your car. It’s compact 1DIN chassis is easy to install in the glove box or any other free compartment.
It is using HDMI technology for data transfer to the Navi Station and can be either touch controlled from the screen or operated using the included wireless remote control. It also features a digital optical output to connect the DVD player to a sound processor.

The KIT-7VWX303 includes all parts for mechanical fitting of an 7-inch Alpine INE-W720D, INE-W720DC, ILX-705D Head Unit, as well as an interface that allows to retain the car’s air condition and heater control screens and the optical parking sensor display.

The interface also supports the vehicle’s radio display in the instrument cluster (MFD) and Steering Wheel Remote Control. An antenna adapter with phantom feed and a power Quadlock adapter are included as well. You can even directly connect the original VW / Skoda / Seat microphone and reversing camera with the wiring harness.