Gezocht naar "alpine tsw 10". Resultaat 11 tot 20 van 125.

This accessory cable was specifically designed for the Alpine Style system for Fiat Ducato. Since the regular camera cable is designed for a passenger car, the 10.5 meter cable length is not enough. This 5 meter cable extends the original camera cable to a total length of over 15 meter.

Superior Sound Performance

Alpine Introduces the all-new Alpine Status sound system: using the same engineering and design concepts drawn from the third generation, Ultra High-Resolution AlpineF#1Status system, Alpine created “Alpine Status” to achieve High-Resolution Sound at a more approachable and accessible price point. The Alpine Status system is also extremely flexible: all components can be purchased and used in “stand-alone” configuration.

The HDP-D90 DSP Amplifier has a 192kHz/32Bit internal sampling rate and an ultra-wide audio bandwidth of 10Hz-110kHz to reproduce sound at its intended high-resolution spec. Intentional designs, like a copper-plated chassis, bring the signal-to-noise ratio up to >110dB and minimize noise and distortion during playback. Drawing inspiration from the internal Master Clock Management System in the AlpineF#1Status DSP, the HDP-D90 contains a Crystal Oscillator Clock Generator at the core of the unit that tracks and aligns digital information to eliminate jitter (timing errors) and accurately reproduce sound.

The DSP has multiple input options for flexible system building. For vehicles that are unable to replace the factory Head Unit, the DSP has 12-channels of high-level inputs that allow the factory Head Unit to be retained. The DSP amp also has an optical input to add the Alpine Status HDS-990 Media Player or analog inputs for another aftermarket Head Unit. The HDP-D90 (when used in stand-alone mode) can also receive music sent directly from a smartphone with Bluetooth wireless streaming.

While the HDP-D90 has 12-channels of amplification (8x 50W x 4x 80W) and can be used to power an entire system, 10-channels of RCA output can be used to add Alpine Status amplifiers for more power or system building.

The installation kit KIT-HALO-DU8S lets you perfectly integrate a 1DIN Alpine Halo system with capacitive WXGA 9-inch or 11-inch screen into the Fiat Ducato III Version 8.

The KIT-HALO-DU8S enables ±10° horizontal monitor swivel of your Alpine unit (INE-F904D, INE-F904DC, iLX-F115D, iLX-F905D).

If your Ducato is already equipped with an original Qi phone charger, you can continue to use it with your Alpine system. This requires the separately sold KWE-Qi-DU8 adapter.

This KIT also supports all buttons of the Ducato’s steering wheel controls, including the telephone (accept / decline) keys.

The included CAN-Bus interface offers several user adjustments, such as setting your Alpine Halo system to already turn on when you open the driver’s door, adjust reversing camera delays and others.

Note:

• the KIT-HALO-DU8S is only compatible with vehicles featuring radio preparation or open dash (no radio equipped).

The installation kit KIT-HALO-TRA7S lets you perfectly integrate a 1DIN Alpine Halo system with 9-inch or 11-inch screen (INE-F904D, INE-F904DC, iLX-F115D, iLX-F905D) into a Ford Transit Custom (model year 2018 ->). The kit also enables ±10° horizontal monitor swivel of your Alpine unit.
The KIT-HALO-TRA7S includes a CAN to UART interface featuring support of the steering wheel remote control buttons (latest data protocol including SIRI and OK Google support). It also includes a plug-and-play wiring harness to easily connect your Alpine unit to the Ford vehicle, a camera cable adapter (Alpine direct – RCA), an antenna adapter and a USB adapter. The wiring harness allows for easy access to ignition, speed signal and reversing signal from the CAN bus.
You can even retain the vehicle settings function in the Alpine head unit and includes the convenient “Preflight-Check” function for motorhome drivers.

Note:

• The KIT-HALO-TRA7S is only compatible with vehicles featuring original Ford 1DIN radio (model T15114A) or radio preparation. For Vehicle featuring the original Ford navigation system the original Ford 1-DIN Trim Panel is needed. Please ask your dealer.
• Vehicles with original radio and e-call system: the e-call system remains functional, but in some cases an error message may be displayed (vehicles with radio preparation will not encounter this problem).

Superior Sound Performance

Alpine Introduces the all-new Alpine Status sound system: using the same engineering and design concepts drawn from the third generation, Ultra High-Resolution AlpineF#1Status system, Alpine created “Alpine Status” to achieve High-Resolution Sound at a more approachable and accessible price point. The Alpine Status system is also extreme flexible: all components can be purchased and used in “stand-alone” configuration.

If you want to build a full Alpine Status sound system with external amplifiers, we recommend the Alpine Status Class-D amplifiers. These amps are developed to perfectly match the Alpine Status speakers and subwoofer for best sound quality. There is a Mono power amplifier (HDA-M80), a 4-channel amplifier (HDA-F60) and a 5-channel amplifier (HDA-V90) with a dedicated high-power subwoofer channel.

All controls are conveniently located on the top side of the amplifiers, protected by a cover plate. This gives you easy access to HP / LP filters and frequency adjustments, gain controls and input channel selectors (different for each amplifier model).

Superior Sound Performance

Alpine Introduces the all-new Alpine Status sound system: using the same engineering and design concepts drawn from the third generation, Ultra High-Resolution AlpineF#1Status system, Alpine created “Alpine Status” to achieve High-Resolution Sound at a more approachable and accessible price point. The Alpine Status system is also extreme flexible: all components can be purchased and used in “stand-alone” configuration.

If you want to build a full Alpine Status sound system with external amplifiers, we recommend the Alpine Status Class-D amplifiers. These amps are developed to perfectly match the Alpine Status speakers and subwoofer for best sound quality. There is a Mono power amplifier (HDA-M80), a 4-channel amplifier (HDA-F60) and a 5-channel amplifier (HDA-V90) with a dedicated high-power subwoofer channel.

All controls are conveniently located on the top side of the amplifiers, protected by a cover plate. This gives you easy access to HP / LP filters and frequency adjustments, gain controls and input channel selectors (different for each amplifier model).

Superior Sound Performance

Alpine Introduces the all-new Alpine Status sound system: using the same engineering and design concepts drawn from the third generation, Ultra High-Resolution AlpineF#1Status system, Alpine created “Alpine Status” to achieve High-Resolution Sound at a more approachable and accessible price point. The Alpine Status system is also extreme flexible: all components can be purchased and used in “stand-alone” configuration.

If you want to build a full Alpine Status sound system with external amplifiers, we recommend the Alpine Status Class-D amplifiers. These amps are developed to perfectly match the Alpine Status speakers and subwoofer for best sound quality. There is a Mono power amplifier (HDA-M80), a 4-channel amplifier (HDA-F60) and a 5-channel amplifier (HDA-V90) with a dedicated high-power subwoofer channel.

All controls are conveniently located on the top side of the amplifiers, protected by a cover plate. This gives you easy access to HP / LP filters and frequency adjustments, gain controls and input channel selectors (different for each amplifier model).

Superior Sound Performance

Alpine Introduces the all-new Alpine Status sound system: using the same engineering and design concepts drawn from the third generation, Ultra High-Resolution AlpineF#1Status system, Alpine created “Alpine Status” to achieve High-Resolution Sound at a more approachable and accessible price point. The Alpine Status system is also extremely flexible: all components can be purchased and used in “stand-alone” configuration.

The HDS-990 Hi-Res Audio Media Player achieves 192kHz/24Bit playback via 3 wired USB DAC inputs or wireless Bluetooth® connection. This ensures that any high-resolution music files stored on a USB or smartphone will be reproduced at the intended spec. It is designed to work in parallel with your original radio (or existing aftermarket radio) and has therefore no radio or DAB+ tuner as well as no Bluetooth hands-free features or similar.

The Media Player includes a compact controller with buttons for basic music controls, a high-resolution color screen that displays playback data and album cover artwork, a volume knob for quick sound controls, and a separate black-box for flexible installation in the vehicle. High-Resolution 4x 50W amplifier output, high-performance RCA outputs and an optical TOSLINK & Coax ports allow for flexible system building with the HDP-D90 Digital Signal Processor (DSP) Amplifier.

The KTX-NS01EU Alpine Navi Stick connects seamlessly to compatible Alpine Digital Media Stations for instant access to cutting-edge navigation with Live Traffic information. Simply plug the Navi Stick into the USB port of your compatible Alpine Head Unit to use the latest iGo Primo nextgen navigation with HERE maps database for all of Europe.

Connect your Alpine Navi Stick to a mobile hot spot or your smartphone to get Live traffic information. This will give you simple color indications of the traffic flow around you, so you can easily avoid busy roads.

The Alpine Navi Stick is especially recommended for motorhome and camper van drivers using the Alpine Halo11 or Halo9, as it also includes the full park4night campsite database. You can easily search by destination, user ratings or category and see available services and even images of the campsite.

You can choose between 3 different motorhome profiles (S / M / L) or create your own profile by manually entering vehicle length, height, width and weight. The Alpine Navi Stick will take the measures and weight of your vehicle into account and propose only routes suitable for your vehicle.

The iLX-F905D Alpine Halo9 is the second generation of Alpine’s world-famous Halo product line, featuring a 9-inch high-resolution WXGA touch-screen and is compatible with virtually any vehicle with 1DIN or 2DIN installation dock. The super-slim display appears to simply hover over your dashboard and can be adjusted in various ways for the best position.

Enjoy wireless Apple CarPlay and Android Auto (wired) compatibility, DAB+ digital radio, USB video playback, Hi-Res Audio playback, Bluetooth hands-free and audio streaming and much more with this amazing Head Unit.

Bring exceptionally good sound quality into your vehicle: the Alpine Halo9 is the world’s first Head Unit featuring a built-in Class-D amplifier and has a wide array of professional sound tuning functions, such as 2-way X-overs, a Parametric EQ, digital time correction and much more.